What is the relationship between automobile and stamping parts?

2019-05-31 14:44:07

The automobile factory has 4 night processes (4 night workshops) farewell is stamping workshop, welding workshop, painting workshop, general disassembly workshop. The automobile stamping parts die in the stamping workshop. To give you an example, all the metal shells you see in automobile shells belong to stamping parts. Basically, the steel plate is operated as a designed die and pressed into the required medium shape by a presser (tonnage to 2000 tonnage) according to the designed process.

As for his fumigation impulse, it is easy to explain that the steel sheet becomes a stamping part through the stamping workshop, and the stamping part becomes a black leather body through the welding workshop. That is, the steel undercarriage, door, roof, ceiling, planning hood, wing plate are all welded in a land explosion, which is equivalent to the skeleton of the vehicle. There are many disassembly locations, many disassembly nuts, disassembly holes and polyester. After painting and dismantling, the general dismantling workshop will dismantle the planning machine, electrical components, interior accessories, seats, standard guides, tires, lights and so on, and a car will be completed on the bottom.

Automotive stamping parts are classified into many categories, and the steel plates used for the whole parts without examples are not opened. Shear shears, such as B-pillar inner panels, are usually used to make strength steel plates, such as the whole parts that are in the side-impact with the impulse of closing and fumigating; some steel plates whose properties are not lower and whose mid-shape has no complicated lifting plate and bracket can be used to make push-and-stretch performance as usual; mid-overnight panels because there is no elegant view for special steel plates to be provided; some mid-shape relative. Complex, medium-sized or relatively slow-moving parts require steel sheets with good stretchability; the raw materials of automotive cylinder gaskets are not opened and blackened, but stamping is a glossy process.

The ten silent night parts of automobile stamping parts are: the inner panel of the hood, the top cover, the left glaze of the wing panel, the inner panel of the left glaze of the middle panel, the inner panel of the left glaze of the front and rear doors, the inner panel of the left glaze before, during and after winter.